B-Equipment with hot and cold hammer: To reduce wrinkles and smooth the skin

Equipment with hot and cold hammer. The heat is used to relax the muscles and open the pores. Cold is used to reduce wrinkles and smooth the skin.

1. During the first use, the hot and cold hammer will start to work after 5 minutes after all the settings are done.

2. After the first treatment, a 3-minute break is needed before the next treatment. .

3. The best working environment temperature is 25 degrees.

4. Do not obstruct the ventilation slots in the hammer as overheating can occur and consequently a short circuit in the electrical system.

5. After pressing the “START/PAUSE” button to start the treatment, make sure that the “-” or “+” buttons on the hammer have also been pressed, otherwise the hammer will not start working

Technical characteristics:

- Weight: 2Kg

- Product size: 20.5 x 22 x 7cm

- Voltage: 220 ~240V

- Input frequency: 50Hz/60Hz

- Working temperature: min. 5ºC/max. 40ºC

Declaration of conformity:

This product complies with the stipulations of the following directives:

1. The measures of the Low Voltage Directive: 2014/35/EU

2. The measures of the Electromagnetic Compatibility Directive: 2014/30/EU

Warranty:

- 1 year