Move portable hot-cold hammer: Ideal for reducing wrinkles and facial treatments
Product in stock. Immediate shipping
* The shipping costs are calculated in the shopping basket
Reference: P04
Description
Portable hot and cold hammer for facial treatments . One end of the hammer provides heat , which acts on the skin by relaxing the muscles and opening the pores .
The opposite end is used to apply cold to the skin, reducing wrinkles and smoothing the skin .
Technical characteristics:
- Input voltage: 220 ~ 240V
- Working temperature: 5 - 40ºC.
It must always be plugged in and has no levels to regulate.
Directions:
- During first use, the hot and cold hammer will start working after 5 minutes once all settings have been made.
- After the first treatment, a 3-minute break is required before the next treatment.
- The best working ambient temperature is 25 degrees.
- Do not block the ventilation slots in the hammer as this may cause overheating and consequently a short circuit in the electrical system.
- It needs to be kept plugged in at all times and has no dimming options.
Contraindications:
- Both sides of the cold and hot hammer are made of aluminum alloy, avoid hitting with these parts.
- If the metal parts of the hammer are damaged, replace them with new ones.
Instructions for use
1. Connect the hammer to the power supply.
2. While the push button is at “O” the hammer will remain off.
3. To activate the cooling option, move the button to “-”.
4. To activate the heat option, move the button to “=”.
5. Once the treatment is finished, move the button to “O” and disconnect the hammer from the power supply.
Declaration of conformity:
- The measures of the Low Voltage Directive: 2014/35/EC
- The measures of the Electromagnetic Compatibility Directive: 2014/30/EC
Warranty:
- 1 year