Starlight Uno Polymerization Lamp: Wireless, ergonomic and with LED light

The Starlight Uno is a high-performance LED light-cured wireless lamp with a long-life lithium-ion battery. The device offers a high luminosity LED light with Class 2 M LED optics. To favor the polymerization process, the light is emitted with a wavelength comprised between 440 nm and 480 nm with a peak at 460 nm and a power of more than 1500 mW / cm2 .

The lamp comes with a built-in radiometer. It has a very simple operation, does not generate heat, and offers two ways of working for the professional:

- Fast Mode: 10 seconds at maximum light intensity. Its acoustic signal signals the beginning and end of the cycle.

- Slow Increase Mode: soft start, 20 seconds with a progressive increase in the intensity of the light that reaches the peak within the first 3 seconds. Its acoustic signal sounds after 10 seconds and at the end of the cycle.

Its long-lasting lithium battery runs approximately 240 cycles of 10 seconds each in succession. It has low battery warning that is activated by acoustic signal when the battery still has enough charge for 6 cycles.

Technical characteristics:

- Curing lamp.

- Wireless.

- With light with LED optics.

- 2 working modes: Fast and slow increase.

- Wavelength 440-480nm.

- Solidification and depth: 10s / 2mm.

- Built-in radiometer.

- Light power 1500 mW / cm2.

- Voltage charging unit: AC100-240V 50-60Hz.

- Charging time: approx. 4 hours.

- Lithium battery without memory, 3.6V 840mAh.

- Weight unit of load: 108 g.

- Measure LWH: 93x93x40mm.

- Hand piece weight: 77gr.

- Length: 190mm Ø 21mm.

- Protection against electrical shocks Type B.

- Available in 6 colors.

Base allocation:

- A hand piece.

- A load base.

- Optical protection.