FFP2 masks with European CE certification (individually wrapped - box of 50 units)

Technical specifications:

- They comply with the EN 149:2001+A1:2009 standard

- Filtration efficiency >94%

- European CE 2834 certificate. The masks have CE certification for category III products. The masks have successfully passed the tests carried out and comply with the requirements established in Regulation (EU) 2016/425 on personal protective equipment and harmonised standards, guaranteed by assessments based on Annex 7 (module C) or Annex 8 (module d).

- Mask and elastic bands free of latex, graphene and fiberglass, does not produce irritations.

- Four-layer design of non-woven fabric and filter fabric, with moldable nose strip in Steel+PP and two soft adjustment elastics (Ear saver included with each unit).

- Higher efficiency medium filter for the highest protection against particles above standard requirements

- Increases its effective usage time by 50% compared to surgical masks.

- It does not irritate the skin, it absorbs water, it is comfortable and soft.

- High stability inner nose bridge.

- Tested and proven effective in laboratories. This certificate of compliance has been granted based on the results of tests carried out by Trust Right Testing and Certification Service (Zhongshan). Accredited by IAS (International Accreditation Service). The mask complies with the provisions of specific European Union standards and is certified to EN 149:2001+A1:2009.

- High-performance filter media with low breathing resistance.

- Exceptional comfort and fit of the mask for users.

How to put on a face mask correctly?

1. With the nose clip facing outwards, pull the ear straps with each hand.

2. Cover your nose, mouth, and chin with the protective mask.

3. Pull the ear strap behind your ear and adjust the strap to fit the mask comfortably.

4. Place your fingers in the middle of the nose clip and press inwards until the clip is fully attached to the bridge of your nose.